Microcontroller

 

Microcontroller Module

Features

  • Open, modular, and simple design for learning purposes
  • Supports a wide range of implementations, from simple MCU operation to parallel processing, memory extension, serial communication, etc.
  • Supports 18-, 28-, and 40-pin packages for PIC12, 16 and 18 families
  • In-circuit USB High Voltage Programmer (compatible with MPLAB® IDE)
  • Dual USB-adaptor power supply (ranging from 7.5VDC to 17VDC)
  • Debugging Module with 32 indicator LEDs and signal-emulation switches
  • Programmer firmware can be modified for extra memory, parallel processing, and/or I/O pin extension
  • Real Time Clock peripheral with 32.768khz crystal and battery socket
  • On-board HD44780 LCD socket with contrast and backlight controls
  • On-board 4x4 keypad socket and signal encoder
  • 40-pin I/O bus with ribbon cable connector
  • Changeable oscillator clock (10MHz crystal included)
  • On-board RS232 peripheral including female socket and level converter
  • I2C bus expansion socket
  • On-board A2D voltage reference setting

Included in the Box

  • PIC microcontroller development board
  • CD/URL from which to download necessary software, drivers, sample codes, and instruction and laboratory manuals
  • USB cable
  • 40-pin I/O bus cable with header
  • HD44780-controlled LCD display
  • 4x4 matrix keypad
  • AC-DC adaptor

 

$129.99


 

FPGA

 

FPGA Module

Features

  • Open, modular, and simple design for learning purposes
  • Can be operated as an independent FPGA (Spartan-3E), PIC (18F2550), or FPGA-PIC driver
  • Can be operated as an independent data acquisition board
  • Can be operated as an interface between Microcontroller, Driver, Sensor, and Utility modules to Changes I/O configuration between modules without a need for rewiring
  • In-circuit USB bootloader PIC Programmer
  • FPGA configuration programmable via both FTDI and PIC
  • Dual USB-adaptor power supply (ranging from 7.5VDC to 17VDC)
  • Stackable voltage convertor board to 5V-level digital Input-output

Included in the Box

  • FPGA-PIC development board
  • Stackable voltage convertor board
  • CD/URL from which to download necessary software, drivers, sample codes, and instruction and laboratory manuals
  • USB cable
  • AC-DC adaptor

 

$129.99


 

Driver

 

Motor Driver Module

Features

  • Open, modular, and simple design for learning purposes
  • Can operate 2 DC motors (or 1 bipolar stepper motor), 1 unipolar stepper motor, 1 servomotor, and 1 brushless DC motor simultaneously
  • Can drive motors with up to 36V and 5A ratings
  • Modular controller and driver circuits
  • Dual USB-adaptor power supply (ranging from 7.5VDC to 17VDC) for the motor controllers
  • Complete USB PC interface/control for motor driving and signal monitoring (through PIC18F4620)
  • Can be operated (start/stop, direction, and speed) manually from the board, through the PC, or in direct connect with a microcontroller

Included in the Box

  • Motor driver board
  • CD/URL from which to download necessary software, drivers, sample codes, and instruction and laboratory manuals
  • USB cable
  • AC-DC adaptor

 

$129.99


 

Sensor

 

Sensor Module

Features

  • Open, modular, and simple design for learning purposes
  • Driver circuits for temperature sensors, PIR motion detectors, phototransistors, photodiodes, resistive sensors, and microswitches
  • Signal conditioning such as amplification, filtering, debouncing, A/D conversion, comparison, summation and difference, integration and differentiation, peak detection, and sample and hold
  • Dual USB-adaptor power supply (ranging from 7.5VDC to 17VDC) for the motor controllers
  • Complete USB PC interface/control for signal monitoring (through PIC18F4620)
  • In-circuit USB bootloader PIC programmer and driver
  • Can be operated as an independent data acquisition board (analog and digital I/O)
  • Software configurable outputs
  • I2C and RS-232 communication

Included in the Box

  • Sensor board
  • CD/URL from which to download necessary software, drivers, sample codes, and instruction and laboratory manuals
  • USB cable
  • AC-DC adaptor

 

$129.99


 

Utility

 

Utility Module

Features

  • Open, modular, and simple design for learning purposes
  • Lab on board: oscilloscope, function generator, battery charger, transistor tester, IR detector, continuity checker, and PIC driver
  • Dual-channel oscilloscope up to 30KHz simultaneous probing
  • Function generator (square, triangle and sine) up to 100KHz with +-10V amplitude
  • Can charge upto 8 NiCd or NiMH cells at a time
  • Can test NPN and PNP bipolar-junction transistors with various for factors
  • Complete USB PC interface for signal monitoring (through PIC18F2550)
  • In-circuit USB bootloader PIC programmer and driver

Included in the Box

  • Utility board
  • CD/URL from which to download necessary software, drivers, sample codes, and instruction and laboratory manuals
  • USB cable
  • USB AC-DC adaptor

 

$99.99


 

PML

 

Personal Mechatronics Lab

Features

  • All the above modules
  • Save nearly 20%

Included in the Box

  • PIC Microcontroller development board
  • FPGA-PIC development and Stackable voltage convertor boards
  • Motor Driver board
  • Sensor board
  • Utility board
  • CD/URL from which to download necessary software, drivers, sample codes, and instruction and laboratory manuals
  • 2 USB cables
  • 40-pin I/O bus cable with header
  • HD44780-controlled LCD display
  • 4x4 matrix keypad
  • AC-DC adaptor

 

$499.99